Reset Ink Absorber Full Canon Pixma IP1800/IP1880 Series
March 22, 2010 – 19:28
Reset Ink Absorber Full Canon Pixma IP1800/IP1880 Series. . I will show you the true instruction for Reset Ink Absorber Full Canon Pixma IP1800/IP1880 Series. It happened to me when my Canon IP1880 the ink absorber is full. I follow all instruction from internet but most of them the wrong instruction. Finally I found the true.
First you must do manual reset for the blinking, you can no use permanent reset software before clear this blinking.
Blinking message:
BLINKING 2
Out of Paper or Paper feed error
BLINKING 3
Paper Jam
BLINKING 4
Tinta cartridge was out
BLINKI NG 5
Cartridge unknown
BLINKI NG 7
Posisi Cartridge isnot right
BLINGKING 8
Ink absorber full
BLINKING 14
Cartridge unknown
To clear blinking the ink absorber Full is Unplug the printer power cable. Then hold the power button, while the power cable plug into an electric current, press the resume button once (the power button is pressed ) emerging power button, until this process will be a normal printer, it can be used for printing.
Now we must use software tools for permanent reset:
download http://i-likethis.com/download in the canon printer section you will see Printer Canon iP-1880 Tools Resetting.
Run the tools and follow this steps:
1. Select USB port
2. Click lock release
3. Click ip1800
4. Click device id
5. Clear waste ink counter by clicking MAIN & PLATEN
6. Check EEPROM Box
7. Click EEPROM Dump
8. Test pattern 1
9. finished
You have done!
Tags: Canon Pixma IP1880 reset, reset canon ip1800, reset canon ip1880, reset Canon Pixma IP1880, Reset Ink Absorber Full Canon Pixma IP1800, Reset Ink Absorber Full Canon Pixma IP1880, resetting, tips
